MaterialsATC

Mechanical and chemical properties of materials used in our production

Ti6AI4V Alloy

Analog of ВТ6L
MECHANICAL PROPERTIES
THE PRECISION LIMIT YIELD STRENGTH YOUNG'S MODULUS RELATIVE ELONGATION
Casting 897 - 1000 MPa 114 GPa 10 - 18 %
ВТ6L Casting 932 MPa 814 MPa 1111,8 GPa 5 %
Ti6AI4V Casting 896 - 930 MPa До 827 MPa 3 - 8 %
Pressing 950 - 1250 MPa 140 MPa 5 %
BT6 Rotary forging with heat treatmen 1200 - 1315 MPa 9 - 10,5 %

CHEMICAL PROPERTIES

ELEMENT MINIMUM % MAXIMUM %
AI Aluminum 5.50 6.75
V Vanadium 3.50 4.50
O Oxygen - 0.20
N Nitrogen - 0.05
H Hydrogen - 0.08
Fe Iron - 0.015
Y Yttrium - 0.30
Ti Titanium Base 0.40
Harmful impurities,
each 		- 0.005
Harmful impurities,
total 		- 0.10

Alloy Inc718

MECHANICAL PROPERTIES
THE PRECISION LIMIT YIELD STRENGTH YOUNG'S MODULUS RELATIVE ELONGATION
Forging with precipitation hardening До 1400 MPa До 1213 MPa До 16%
Precipitation hardening До 1421 MPa До 1213 MPa 9,5%

CHEMICAL PROPERTIES

ELEMENT MINIMUM % MAXIMUM %
NI Nickel 50 55
Cr Chrome 17 21
Nb Niobium 4.75 5.5
Mo Molybdenum 2.8 3.3
Ti Titanium 0.65 1.15
Al Aluminum 0.20 0.80
Co Cobalt <1 1
Cu Kuprum <0.3 0.3
C   Carbon <0.08
 0.08
Si, Mn   Silicon, Manganese <0.35
 0.35
P, S Phosphorus, Sulfur <0.015
 0.015
B Bohr <0.006
 0.006
Fe Iron Base

CoCr Alloy

MECHANICAL PROPERTIE
THE PRECISION LIMIT YIELD STRENGTH YOUNG'S MODULUS RELATIVE ELONGATION ROUGHNESS (AFTER PRINTING) ACCURACY
EOS 1100-1300 MPa 600-1000 MPa 190-220 GPa 11-20% от 5 мкм От +-20 мкм
Milling and sintering 830 MPa 450 MPa 200 GPa 20%
Casting 655-723 MPa 448-517 MPa 6-10%

CHEMICAL PROPERTIES

ELEMENT MINIMUM % MAXIMUM %
Co Cobalt 60 65
Cr Chrome 26 30
Mo Molybdenum 5 7
Si Silicon <1
 1
Mn
 Manganese <1
 1
Fe Iron <0.75
 0.75
C   Carbon <0.16
 0.16
NI Nickel <0.10
 0.10

AlSi10Mg Alloy

Analog of AK9ch
MECHANICAL PROPERTIES
THE PRECISION LIMIT YIELD STRENGTH YOUNG'S MODULUS RELATIVE ELONGATION
3D Systems DMP ProX 320 300-400 MPa 170-260 MPa 71-73 GPa 3-12%
Coquille casting
of AK9ch 		147-235 MPa

2-3%
Injection molding of AK9ch 290 MPa 160 MPa 2%
The sand casting of AK9ch 260 MPa 200 MPa ~200 GPa 4%
Injection molding of AlSi10Mg ~240 MPa 140 MPa 1%

CHEMICAL PROPERTIES

ELEMENT MINIMUM % MAXIMUM %
C Carbon
0.030
Cr Chrome 17.5 18.0
Cu   Copper
0.50
Fe Iron Balance
Mn
 Magnesium
2.00
Mo Molybdenum 2.25 2.50
N Nitrogen
0.10
Ni Nickel 12.5 13.0
O Oxygen
0.10
P Phosphorus
0.025
S Sulfur
0.010
Si Silicon
0.75

316L alloy

Analog of 03Х17Н14М3
MECHANICAL PROPERTIES
THE PRECISION LIMIT YIELD STRENGTH YOUNG'S MODULUS RELATIVE ELONGATION
Casting 515-625 MPa 205-350 MPa
40-50%
Casting
 485 MPa 170 MPa
~200 GPa 40%
Casting with firing 485-570 MPa 170-300 MPa 40-60%
Concept Laser 529-650 MPa 330-374 MPa ~200 GPa 63-65%

CHEMICAL PROPERTIES

ELEMENT MINIMUM % MAXIMUM %
C Carbon
0.030
Cr Chrome 17.5 18.0
Cu   Copper
0.50
Fe Iron Balance
Mn
 Magnesium
2.00
Mo Molybdenum 2.25 2.50
N Nitrogen
0.10
Ni Nickel 12.5 13.0
O Oxygen
0.10
P Phosphorus
0.025
S Sulfur
0.010
Si Silicon
0.75

JSC ATC’S QUALITY POLICY

JSC ATC’S MISSION

Our mission is to become the leading integrator of complex solutions in additive manufacturing for Russian industry.

OUR GOALS

- To reduce the time needed to bring new high-tech products to the market

- To change the approach to designing and production of innovative products

- To reduce Russia's lag behind foreign companies in implementing additive technologies in industry

OUR PRINCIPLES

- The customer is always right. The customer is the main source of our well-being and development, which requires respect.

- СModernity: always keep up with the times and one step ahead, using modern production technologies and management methods.

- The quality of our products and services must meet consumers’ requirements and exceed their expectations.

OUR STRATEGY

- To maintain existing and develop new markets for products and services.

- To develop and bring to market the types of products and services required by the consumer.

- To improve the quality of products and services basing on consumers’ requirements and expectations.

- To preserve the workforce and maintain a favorable psychological climate that contributes to the identification of problems and their effective solution.

THE MANAGEMENT HAS IDENTIFIED THE MAIN DIRECTIONS FOR IMPLEMENTING THE POLICY

- Improving the effectiveness of the organization's activities and its competitiveness, taking into account the interests of customers, shareholders of the company and the team.

- Systematic analysis of current and future consumers’ requirements and expectations and their meeting with our products and services.

- Meeting the requirements and continuously improving the effectiveness of the quality management system based on the international standard ISO 9001.

- Regular training and improvement of staff competence.

- Development of new and improvement of existing production technologies.

- Development of the organization’s material and technical base - the acquisition of new equipment.

- Creating mutually beneficial relationships with suppliers based on trust and partnership.

The management of JSC ATC assumes responsibility for the implementation of this quality policy, for ensuring that it is understood and supported by all employees of the company.

CEO
V. O. Kochkurov

This site uses cookies to personalize content.
By continuing to use this site, you agree to our use of cookies.